Need help with installing a Split Cotter Pin correctly?

Here is our helpful guide to provide assistance in ensuring you are using the correct size and installing your split cotter pin correctly.

Here is some helpful information when it comes to fitting Spring Pins, also known as Roll Pins.

Firstly, make sure the spring pin or roll pin is the correct size. These are always listed by the hole size they are fitting in to. For example, a 5mm spring pin, will suit a 5mm hole.

Then make sure the holes in both the Spring Pin, and the hole in your application are aligned accurately so the pin can be inserted smoothly.

Once the pin is aligned to the hole, gently tap the pin in using controlled strikes to avoid misalignment or deformation.

Finally, ensure the pin has a flush fit to the components surface, this will provide a secure connection.

Looking to order Spring Pins / Roll Pins? We stock a wide range of these Pins, available for same day dispatch. View the full range here: https://springfasteners.co.uk/product-category/engineering-pins/spring-tension-pins-din1481/

Caleb Components is one of the UK’s leading online suppliers of Key Steel, stocking a wide range of 300mm lengths, available for same day dispatch.

You can browse our full range of Metric Key Steel using the link below:

Have any questions? Please feel free to contact us, and we will be happy to assist.

Flat Washers – Shop a wide range of DIN 125 Form A Flat Washers online:

Here is a list of the standard DIN or Series standards for various Circlips:

Browse our full range of Circlips here: https://springfasteners.co.uk/product-category/circlips/

One of the most common issues faced with Roll Pins or Spring Pins, is how to decide what size you require.

However it’s very simple… A Roll Pin or Spring Pin is always listed by the HOLE size it is fitting into. For example if the hole size is 10mm, you will require a 10mm Pin. These Pins are always produced slightly oversized on the outside diameter, to enable them to close down and fit securely into the hole. Using the same size example above, a 10mm Pin will have am outside diameter of 10.5 – 10.8mm, so that it closes down into the 10mm hole.

Each product page on our website for these types of Pins will contain the hole size and the outside diameter measurements to help you decide which Pin you require.

Still require more help? Please contact us and we will be happy to assist you.

Browse the full range using the links below…

Metric Spring Tension Pins / Roll Pins – Carbon Steel

Metric Spring Tension Pins / Roll Pins – Stainless Steel

Imperial Spring Tension Pin / Roll Pins – Carbon Steel

Here is some helpful information on the application of Shakeproof Washers / Toothed Lock Washers.

Shakeproof Washers should be placed under your threaded fastener, for example the nut or the bolt or screw. In some applications or assemblies you may have a nut and a bolt, in this instance, place the shakeproof washer in between the nut and the head of the bolt. IMPORTANT! The washer should sit securely against both surfaces.

For removing a Shakeproof Washer, after you have removed the nut or bolt, simply use a flat screwdriver to pry the washer away. Lubricant may also come in handy if the washer has got stuck in the application.

Need to order Shakeproof Washers? Simply follow the links below to browse our full range.

The primary purpose of Spring Washers DIN 127B, also known as Single Coil Spring Lock Washers, is to offer tension and preload in joint assemblies. This aids in maintaining clamping force and prevents loosening or loss of tension due to vibration, thermal cycling, or other factors. Spring Washers also help to absorb shock and reduce the impact of cyclic loading on the joint, which can improve the durability and lifespan of the assembly. Additionally, Spring Washers can be used to compensate for small amounts of misalignment or to adjust the tension in a joint without the need for additional components.

To view our full range of Spring Washers, simply use the link below:

Here is a basic overview of Belleville Washers, also known as Disc Spring Washers.

Belleville Washers, are cupped spring washers that flatten out as pressure is applied to them. Unlike a flat washer, a Belleville washer absorbs vibration and shocks, making them very important in several applications and industries.

Our Belleville Washers / Disc Springs are manufactured to DIN 2093 specifications, and are produced from carbon spring steel.

Browse our full range below:

 Key Steel is used to locate and drive a pulley, drum, coupling or propeller from drive shafts, a mechanical component used for transmitting torque and rotation.

Here at Caleb Components, we offer both metric and imperial Key Steel, supplied online in 300mm / 12″ lengths.

You can browse the full range here – https://springfasteners.co.uk/product-category/keysteel-key-steel-300mm-12-lengths/