E-Clips can also be known as E Type Circlips and work very similar to that of an External Circlip. They can be easily inserted from the side of the shaft by using an Applicator or standard pliers.

We stock a range of E-Clips in a variety of materials.

• Standard Metric E-Clips to DIN 6799 (D1500) standards. Available in Carbon Steel, 420 Stainless Steel, 316 (A4) Stainless Steel, Titanium, Beryllium Copper and Phosphor Bronze
• Imperial E Clips (N1500). Available in Carbon Steel, Stainless Steel including 316 (A4) Stainless Steel, Titanium, Beryllium Copper and Phosphor Bronze
• Reinforced E-Clips (N1540) in Carbon Steel, Stainless Steel & Titanium

If you have an enquiry for E-Clips please don’t hesitate to contact us. Call + 44 (0) 1384 453955 or email us at sales@calebcomponents.com

Caleb Components – UK Supplier of E-Clips (E Type Circlips)

Split Cotter Pins are often used a simple fixing device to help prevent parts sliding off a shaft. Here at Caleb Components we supply high quality Split Cotter Pins in both Metric and Imperial sizes.

We can offer in the following materials:

• Mild Steel, Self Colour
• Mild Steel, Bright Zinc Plated (available online)
• Stainless Steel including 316 (A4) Stainless Steel
• Brass

Our Cotter Pins are produced to DIN 94 / ISO 1234 specifications.

Have an enquiry for Split Cotter Pins, please contact us today! Call + 44 (0) 1384 453955 or email us at sales@calebcomponents.com

Caleb Components – UK Supplier of Split Cotter Pins

Here at Caleb Components, we supply a range of high quality Snap Rings.

Included in our range:

• External & Internal Snap Rings (M2400 / M2300 or SWM / SBM range)
• M3200 External Snap Rings
• DIN 7993 (Part A / Part B) Snap Rings
• DIN 5417 External Snap Rings

We can also offer special sized Snap Rings upon request.

If you have any enquiries for Snap Rings, please don’t hesitate to contact us.

Call + 44 (0) 1384 453955 or Email sales@calebcomponents.com

Caleb Components – UK supplier of high quality Snap Rings

Here at Caleb Components we supply high quality Spring Pins (also known as Tension Pins / Roll Pins or Selloc Pins). We specialise in non-standard sized Spring Pins as well as Spring Pins made in special materials.

What can we offer?

• Standard Spring Tension Pins (Slotted Type) in Carbon Steel & Stainless Steel. DIN 1481 / ISO 8752. Both metric and imperial sizes available.
• Non-standard sized Spring Tension Pins in Carbon Steel & Stainless Steel
• Light Duty Spring Tension Pins (Slotted Type) in Carbon Steel & Stainless Steel. DIN 7346 / ISO 13337.
• Coil Pins / Spiral Pins in Carbon Steel & Stainless Steel. Medium Duty & Heavy Duty available.

We can also offer our Spring Tension Pins in the following special materials:

• 304 Stainless Steel
• 316 (A4) Stainless Steel
• Inconel
• Phosphor Bronze
• Beryllium Copper

Need a quotation or technical advice? Please contact us today. Tel + 44 (0) 1384 453955 or email us at sales@calebcomponents.com. We welcome any enquiry you may have.

Caleb Components – UK Supplier of high quality Spring Pins

Purchase a wide range of Internal & External Circlips from us today.

We offer the following Circlips:

• Standard DIN 471 (D1400) External and DIN 472 (D1300) Internal
• E Clips DIN 6799 (D1500)
• Imperial E Clips (N1500)
• Heavy Duty DIN 1460 & DIN 1360 Circlips
• Imperial External and Internal
• Inverted Lug / Balanced Lug Circlips (Metric and Imperial)
• Increased Abutment Circlips DIN 983 and DIN 984
• Grip Rings & Crescent Rings

We can offer our Circlips in a wide range of materials including Carbon Spring Steel, Stainless Steel (including 316 (A4) Stainless Steel) Titanium, Inconel and Phosphor Bronze

We can also offer in different finishes including Bright Zinc Plate and Deltatone (Dacromet).

Please contact us today with any enquiries you may have for Circlips and we will be happy to help you. Call + 44 (0) 1384 453955 or email sales@calebcomponents.com

Caleb Components is a supplier of high quality metric & imperial Key Steel.

Our metric Key Steel is available in 300mm & 1 metre lengths. 300mm lengths available to buy online: https://springfasteners.co.uk/product-category/key-steel-300mm-12-lengths/metric-key-steel/

Our imperial Key Steel is available in 12″ x 1 metre lengths. 12″ lengths available to buy online: https://springfasteners.co.uk/product-category/key-steel-300mm-12-lengths/key-steel-imperial-12-lenghts/

Require 1 metre (1000mm) length key steel? Please contact us today on + 44 (0) 1384 453955 or email us at sales@calebcomponents.com

One of the lesser common types of Spring Tension Pins is the Light Duty type & can be difficult to source at times.

They are known as ‘Light Duty’ due to the fact that the wall thickness is thinner than that of a standard Heavy Duty Spring Tension Pin.

The standard specifications are DIN 7346 / ISO 13337.

Here at Caleb Components we can supply a wide range of of sizes within the Light Duty range, with nominal diameters starting from 1.5mm up to 50mm. We can also supply these Pins in a range of materials including standard Carbon Steel and Stainless Steel (including 316 (A4) Stainless Steel).

If you require a quotation for or need technical advice on Light Duty Spring Tension Pins, please get in touch today. Call + 44 (0) 1384 453955 or email us at sales@calebcomponents.com & we will be happy to help you find what you’re looking for!

Included in our wide range of Engineering Pins are our Dowel Pins, including both Solid Dowel Pins & Extractable Dowel Pins.

Dowel Pins are most commonly precision ground to ensure an accurate fitting when holding parts together.

Our Dowel Pins include:

• Hardened & Ground Solid Dowel Pins to DIN 6325 specifications – https://springfasteners.co.uk/product-category/pins/solid-dowel-pins-din-6325/ – Can also offer in 303 Stainless Steel and 316 (A4) Stainless Steel – Please contact us for a quotation.
• DIN 7 / ISO 2338 Dowel Pins available in Mild Steel, Stainless Steel and 316 (A4) Stainless Steel – Please contact us for a quotation.
• Hardened & Ground Extractable Dowel Pins to DIN 7979 / ISO 8735  – https://springfasteners.co.uk/product-category/pins/extractable-dowel-pins-din-7979d/

Looking for Dowel Pins with special requirements? Please dont hesitate to contact us with any enquiries you may have. Call + 44 (0) 1384 453955 or email us at sales@calebcomponents.com

Here at Caleb Components we stock a wide range of Disc Spring Washers (also known as Belleville Washers or Disc Springs).

The main purpose of a Disc Spring (or stack of Disc Springs) is to provide a high force in a relatively small space compared with that of a Compression Spring.

What’s included in our range?

• Standard Disc Spring Washers (Belleville Washers) to DIN 2093 specifications
• Heavy Duty Disc Spring Washers (Conical Washers) to DIN 6796 specifications
• Ball Bearing Preload Disc Spring Washers

Our Disc Springs can be manufactured in a wide range of materials. These included standard Carbon Steel, Chrome Vanadium Spring Steel, Stainless Steel (including FV520B), Inconel 718, Inconel X750 & Nimonic 90.

We can also offer in a variety of finishes, including standard Phosphate / Oil and Deltatone.

If you have an enquiry for Disc Spring Washers, please dont hesitate to contact us.

Call: + 44 (0) 1384 453955

Email: sales@calebcomponents.com