We stock a range of Disc Springs here at Caleb Components.
Listed below are the type of Disc Springs we offer online. Please note, we offer special size Disc Springs upon request and would welcome any enquiries you may have.
Disc Spring (Belleville Washers) DIN2093 – https://springfasteners.co.uk/product-category/disc-springs/disc-springs-belleville-washers/
Ball Bearing Pre-Load Disc Springs – https://springfasteners.co.uk/product-category/disc-springs/ball-bearing-pre-load-disc-springs/
Heavy Duty Disc Springs DIN 6796 – https://springfasteners.co.uk/product-category/disc-springs/heavy-duty-disc-springs-din-6796/
Light Duty Serrated Safety Washers (LDS) – https://springfasteners.co.uk/product-category/disc-springs/light-duty-serrated-safety-washer-lds/
Medium Duty Serrated Safety Washers (MDS) – https://springfasteners.co.uk/product-category/disc-springs/medium-duty-serrated-safety-washer-mds/

Our Key Steel is supplied to DIN6880 standard and is available in 300mm or 12″ lengths online.
If you require longer lengths, please let us know!
Metric Key Steel: https://springfasteners.co.uk/product-category/key-steel-300mm-12-lengths/metric-key-steel/
Imperial Key Steel: https://springfasteners.co.uk/product-category/key-steel-300mm-12-lengths/key-steel-imperial-12-lenghts/

Caleb Components supplies Shim Washers (DIN 988) in assorted kits.
So whats included?
We offer two options of Shim Washer Kits, one for the smaller sizes and one for the medium sizes.

* sizes included in our Shim Washer Kits for the smaller sizes:
8 x 14 x 0.1mm, 8 x 14 x 0.2mm, 8 x 14 x 0.5mm, 8 x 14 x 1.mm, 9 x 15 x 0.2mm, 9 x 15 x 0.3mm, 9 x 15 x 0.5mm, 9 x 15 x 1.2mm, 10 x 16 x 0.1mm, 10 x 16 x 0,2mm, 10 x 16 x 0.3mm, 10 x 16 x 0.5mm, 12 x 18 x 0.1mm, 12 x 18 x 0.15mm, 12 x 18 x 0.25mm, 13 x 19 x 0.5mm, 13mm x 19mm x 1mm & 14 x 20 x 1mm. There are 30pcs of each size included. To purchase this product, please use link below:
https://springfasteners.co.uk/product/din-988-shim-washer-small-sizes-qty-1-box/

* sizes included in out Shim Washer Kits for the medium sizes:
15 x 22 x 0.5mm, 15 x 22 x 1mm, 16 x 22 x 0.1mm, 16 x 22 x 0.2mm, 16 x 22 x 0.5mm, 16 x 22mm x 1mm, 17 x 24 x 0.2mm, 17 x 24 x 0.5mm, 18 x 25 x 0.1mm, 18 x 25 x 0.2mm, 18 x 25 x 0.3mm, 19 x 26 x 0.2mm, 19 x 26 x 0.3mm, 19 x 26 x 0.5mm, 20 x 28 x 0.1mm, 20 x 28 x 0.3mm, 20 x 28 x 0.5mm, 20 x 28 x 1mm. Again 30pcs of each size included.
Please use link below if you wish to buy this product: https://springfasteners.co.uk/product/din-988-shim-washer-medium-sizes-qty-1-box/

We are stockists of a wide range of Pin fasteners.
Examples of what we offer: Slotted Spring Tension Pins (roll pins, sellock pins): https://springfasteners.co.uk/product-category/pins/spring-tension-pins-din1481/
Spring Tension Pin Kit (Metric): https://springfasteners.co.uk/product/internal-circlip-kit-metric-qty-1-box/
Our Spring Tension Pins are also available in Stainless Steel: https://springfasteners.co.uk/product-category/pins/spring-tension-pins-slotted-type-din-1481-stainless-steel/
You can also purchase Imperial Slotted Spring Tension Pins: https://springfasteners.co.uk/product-category/pins/imperial-spring-tension-pins-carbon-steel/
We also offer non-standard sizes of Spring Tension Pins which may just fit your requirements: https://springfasteners.co.uk/product-category/pins/spring-tension-pins-non-preferred-sizes/
A new range we now offer is Lightweight Spring Tension Pins to ISO13337 (DIN 7346) Standard:https://springfasteners.co.uk/product-category/pins/light-weight-spring-tension-pins-din-7346-iso-13337/
You can also buy Solid Dowel Pins (DIN 6325) from us: https://springfasteners.co.uk/product-category/pins/solid-dowel-pins-din-6325/
Why not check out our Single Coil Retaining Pins (R Clips) online: https://springfasteners.co.uk/product-category/pins/retaining-pins-single-coil-r-clips-bright-zinc-plated/
And finally… Our Split Cotter Pins to DIN 94 Standard, Bright Zinc Plated: https://springfasteners.co.uk/product-category/pins/split-cotter-pins/
A Split Cotter Pin Kit is also available to purchase: https://springfasteners.co.uk/product/split-cotter-pin-bzp-kit-metric-qty-1-box/

Here at Caleb Components we supply high quality Titanium Internal and External Circlips.

Titanium has excellent anti-corrosive properties, extremely strong, and very light.

Should you require a quotation, or technical advice on our Titanium Circlips, please contact us today. Call + 44 (0)121 661 6664 or emails us, sales@calebcomponents.com

Caleb Components – Supplier of high quality Titanium Circlips

You can now buy both Metric and Imperial Push on fasteners. M1465 & N1465 Ranges. These can also be called Push On Fixings or Push On Fixing Washers. Not only can they be used on shafts, they can also be used on studs, plastic shafts, tubes etc.
The prongs on the fastener are used to grip the shaft tightly, securely locking the washer in place.
Please use links below to check out our Push On Fastener (fixings) range:
M1465 Metric Push On fasteners: https://springfasteners.co.uk/product-category/push-on-fasteners-2/push-on-fastener-m1465/
N1465 Imperial Push On fasteners: https://springfasteners.co.uk/product-category/push-on-fasteners-2/push-on-fastener-imperial-n1465-range/

You can purchase online Slotted Spring Tension Pin (Roll Pin) Kits.
Available in both metric and imperial.
The following sizes are included in our Metric Spring Tension Pin Kit:
1.5mm x 8mm, 2mm x 5mm, 2mm x 10mm, 2mm x 20mm, 2.5mm x 10mm, 2.5mm x 18mm, 3mm x 12mm, 3mm x 20mm, 3mm x 30mm, 3mm x 40mm, 4mm x 20mm, 4mm x 32mm, 5mm x 14mm, 5mm x 26mm, 5mm x 30mm, 6mm x 16mm, 6mm x 20mm, 6mm x 2mm, 6mm x 26mm
https://springfasteners.co.uk/product/internal-circlip-kit-metric-qty-1-box/

The following sizes are included in our Imperial Spring Tension Pin Kit:
1/16″ x 1/2″, 1/16″ x 1″, 1/16″ x 1.1/2″, 3/32″ x 1/4″, 3/32″ x 1/2″, 3/32″ x 1″, 1/8″ x 3/4″, 1/8″ x 7/8″, 1/8″ x 1.1/4″, 5/32″ x 3/4″, 5/32″ x 1.1/8″, 3/16″ x 7/16″, 3/16″ x 1″, 3/16″ x 1.1/2″, 7/32″ x 1/2″, 1/4″ x 1/2″, 1/4″ x 5/8″, 1/4″ x 1.1/8″.
https://springfasteners.co.uk/product/spring-tension-pin-imperial-kit-qty-1-box/

Caleb Components offers External Circlip Kits in both metric and imperial, and Internal Circlip Kits in both metric and imperial.
Material: Carbon steel.
They include 18 different sizes and approx 550pcs!
(Please note, if you require Stainless Steel Circlip Kits please let us know)
What’s included?
* Internal Circlip Kit (metric) DIN 472: 8MM, 9MM, 10MM, 11MM, 12MM, 12MM, 14MM, 15MM, 16MM, 17MM, 18MM, 19MM, 20MM, 21MM, 22MM, 23MM, 24MM, 25MM, 30MM, 32MM
Find it here: https://springfasteners.co.uk/product/internal-circlip-kit-metric-qty-1-box-2/

* External Circlip Kit (metric) DIN 471: 3MM, 4MM, 5MM, 6MM, 7MM, 8MM, 9MM, 10MM, 11MM, 12MM, 15MM, 18MM, 20MM, 23MM, 25MM, 28MM, 30MM, 32MM
Find it here: https://springfasteners.co.uk/product/external-circlip-kit-metric-qty-1-box/

* Internal Circlip Kit (imperial): 1/4, 3/16, 3/8, 7/16, 15/32, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 0.9″, 1.00, 1.1/8, 1.3/16, 1.1/4, 1.5/16
Find it here: https://springfasteners.co.uk/product/internal-circlip-kit-imperial-qty-1-box/

* External Circlip Kit (imperial): 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 3/8, 7/16, 1/2, 5/8, 11/16, 3/4, 25/32, 13/16, 7/8, 1.00, 1.1/8, 1.3/16
Find it here: https://springfasteners.co.uk/product/external-circlip-kit-imperial-qty-1-box/

For the full range of our kits online, please use this link. https://springfasteners.co.uk/product-category/caleb-kits/

Caleb Components stocks a wide range of Shim/Support Washers to DIN 988 Standard.
Our Shim Washer range starts from as small as 3mm x 6mm x 0.1mm and are offered in a wide range of thicknesses.
You can purchase Shim Washers online! Please use the link below.
https://springfasteners.co.uk/product-category/washers/shimsupport-washers-din-988/

You can also purchase shim washer kits online too
https://springfasteners.co.uk/product/din-988-shim-washer-small-sizes-qty-1-box/
https://springfasteners.co.uk/product/din-988-shim-washer-medium-sizes-qty-1-box/