Caleb Components are stockists of both External Snap rings & Internal Snap rings.
(M2400 & M2300 Range).
These Snap Rings are now available to buy online on our spring fasteners website. Please use the link below.
If you cant find the Snap Rings you require, please let us know and we will be happy to help!
EXTERNAL SNAP RINGS – https://springfasteners.co.uk/product-category/snap-rings/external-snap-ring-m2400-2/
INTERNAL SNAP RINGS – https://springfasteners.co.uk/product-category/snap-rings/external-snap-ring-m2400/

Caleb Components offers Split Cotter Pins to DIN 94 Standard.
Finish: Bright Zinc Plate (BZP).
Split Cotter Pins are produced to fit easily into pre-drilled components and can also be fitted around a shaft.
Link for our Cotter pins is below.
https://springfasteners.co.uk/product-category/pins/split-cotter-pins/
We also offer our Split Cotter Pins in an assorted kit…
https://springfasteners.co.uk/product/split-cotter-pin-bzp-kit-metric-qty-1-box/

One of the newest products that has been added to our range is the DIN 6325 Solid Dowel Pin.
These type of pins are usually precision ground to narrow limits to ensure precise and accurate fitting.
Our range starts from as small as 1mm x 4mm.
Why not check out our range using the link below.
https://springfasteners.co.uk/product-category/pins/solid-dowel-pins-din-6325/

Here at Caleb Components we stock DIN 988 Shim Washers, from as small as 3mm x 6mm x 0.1mm.
Carbon steel, plain finish.
Shim Washers are manufactured to precise dimensions and are applied to take up excess gaps in assemblies, (especially bearing assemblies).
Why not check out our full range of Shim Washers using the below link.
https://springfasteners.co.uk/product-category/washers/shimsupport-washers-din-988/

Caleb Components is a stockist of Carbon & Stainless Steel Fasteners.
Included in our range are:
* Circlips / E-Clips
* Disc Springs
* Snap Rings
* Wire Rings
* Serrated Safety Washers
* Spring Tension Pins
* Split Cotter Pins
* Retaining Pins
* Shim /Support Washers
* Flat Washers
* Hose Clamps (Jubilee Clips)
* Grub Screws (A2 SS)
* Key Steel
* Fastener and Washer Kits
* Circlip Pliers & E-Clip Applicators

Caleb Components offers Solid Dowel Pins M6 Tolerance to DIN 6325 standard.
Our Solid Dowel Pins are precision ground to narrow and precise limits to ensure accurate fitting. Solid Dowel Pins are usually used to hold parts together in a fixed alignment, relying on the tightness of fit to remain secure and in place.
We offer our Solid Dowel Pins in Carbon steel, plain finish. If you require Stainless Steel Dowel Pins, please get in touch with your requirements, and we will be happy to help you find what you’re looking for.
To check out our online range, please use the link below.
https://springfasteners.co.uk/product-category/pins/solid-dowel-pins-din-6325/

You can now purchase E-Clip Applicators for 1.2mm – 24mm E-Clips.
These make fitting E-Clips more simple! They hold the E-Clips securely whilst being installed and release the E-Clip once fully assembled.
Why not check out our online range of E-CLip applicators:
https://springfasteners.co.uk/product-category/e-clips/e-clip-d1500-applicator-metric/

Caleb Components offers Heavy Duty External Circlips (To DIN 1460 Standard) in both Carbon steel & Stainless steel.
The design of this Circlip is based on a standard External Circlip (DIN 471) but with increased thickness. Heavy Duty Circlips are used to withstand shock loads and offer resistance to conical deformation.
We offer our Heavy Duty Circlips in small pack quantities (links below), but if you require bulk quantities of these parts, please don’t hesitate to contact us.
Carbon steel – https://springfasteners.co.uk/product-category/circlips/heavy-duty-ext-circlips-din1460/
Stainless steel – https://springfasteners.co.uk/product-category/circlips/hduty-ext-circlips-din1460-st-stl/

You can purchase Internal & External Circlip pliers from Caleb Components!
Circlip pliers fit into the two holes placed in the lug of the Circlip, and are used to install or remove Circlips, expanding or contracting the Circlip so it can fit around a shaft or a groove within a bore.
Please use below links to see our range of Circlip Pliers.
External Circlip Pliers – https://springfasteners.co.uk/product-category/circlips/pliers/external-circlip-pliers/
Internal Circlip Pliers – https://springfasteners.co.uk/product-category/circlips/pliers/internal-circlip-pliers/

Many of our parts have DIN & ISO standards. Please see our list below to see which part matches which standards.
CIRCLIPS
External Circlips (D1400) – DIN 471
Internal Circlips (D1300) – DIN 472
Heavy Duty External Circlips – DIN 1460
Increased Abutment Circlip External – DIN 983
Increased Abutment Circlip Internal – DIN 984

E-CLIPS
Standard Metric E-clips (D1500) – DIN 6799

Disc Springs
Disc Springs / Belleville Washers – DIN 2093
Heavy Duty Disc Springs / Belleville Washers – DIN 6796

Washers
Shim Washers – DIN 988
Flat Washers A Type – DIN 125
Toothlock Washers – DIN 6797
Single Coil Tension Washers Type B – DIN 127

Pins
Spring Tension Pins / Roll Pins / Sellock Pins – ISO 8752 / DIN 1481
Split Cotter Pins – ISO 1234 / DIN 94
Lightweight Spring Tension Pins – ISO 13337 / DIN 7346
Solid Dowel Pins – DIN 6325

Screws
Grub Screws Cup Point – DIN 916