Looking for high quality Stainless Steel Slotted Spring Pins (Roll Pins)?

Here at Caleb Components, we stock a wide range of these Pins, available in small pack sizes, and fantastic value for money.

We have been selling these Pins for over 20 years, and have full technical knowledge on these parts, so please don’t hesitate to contact us with any enquiries.

To view our full range, please follow the link below:

Caleb Components stocks one of the largest ranges of DIN 2093 Disc Springs (Belleville Washers) in the UK.

For customers who only need a handful, we offer these in small pack quantities, and offer next working day delivery across our range.

Choose us today for your DIN 2093 Disc Springs.

Shop online: DISC SPRINGS DIN 2093https://springfasteners.co.uk/product-category/disc-springs/disc-springs-belleville-washers/

Here at Caleb Components, we are constantly increasing our range of DIN 988 Shim Washers.

Our Shim Washers are on of our most popular products, selling daily.

Why we are the number 1 UK supplier of Shim Washers:

• Huge range in stock
• Same day shipping
• Next working day delivery
• Small pack quantities available
• Full technical assistance available too

Shop the full range here: https://springfasteners.co.uk/product-category/shimsupport-washers-din-988/

Have a question? Please complete the contact form below, and we will get back to you as quickly as possible.

We are now stockists of a fantastic range of Shakeproof Washers – both external and internal types.

Finished in a Bright Zinc Plate for corrosion resistance.

External Shakeproof Washers are produced to DIN 6797A standards, and Internal Shakeproof Washers to DIN 6797J.

These washers can also be known as Tooth Lock Washers.

Browse our full range using the links below:

EXTERNAL DIN 6797A

INTERNAL DIN 6797J

Here are some of the most asked questions on E Clips…

• Q: How do I measure a metric E Clip?
• A: METRIC are always listed by the GROOVE size on the shaft. E.G. if the groove size on the shaft is 5mm, you will require a 5mm E Clip.
• Q: What materials are readily available?
• A: Off the shelf, we offer Carbon Spring Steel or 420 Stainless Steel, with limited sizes available in 316 / A4 Stainless Steel. Other bespoke materials such as Phosphor Bronze or Inconel can be manufactured upon request (please note, MOQs will apply).
• Q: How to insert an E Clip?
• A: An E Clip applicator is a great tool to use for inserting E Clips on to a shaft. E Clips are designed to be pushed on from the side of the shaft into the groove not from the front.
• Q: How do I order the correct Imperial E Clip?
• A: Imperial E Clips are always listed by the SHAFT size they’re fitting on to. E.G. if your shaft measures 1/2″ (0.50″), you will require a 1/2″ E Clip (N1500-0050)

We are always on hand to help you find the correct E Clip. Please contact using the contact form below should you require some advice, or simply call us on 01384 453955 (lines open Monday – Friday 8.30am – 5pm)

Order E Clips online:

METRIC CARBON STEEL E CLIPS – SHOP NOW

METRIC STAINLESS STEEL E CLIPS – SHOP NOW

IMPERIAL CARBON STEEL E CLIPS – SHOP NOW

Caleb Components is one of the leading UK’s leading suppliers of Split Cotter Pins.

We offer DIN 94 BZP Split Cotter Pins in small pack quantities available for next working day delivery.

Browse our full range of Split Cotter Pins online here: https://springfasteners.co.uk/product-category/engineering-pins/split-cotter-pins/

Slotted Roll Pins (Spring Tension Pins) available for next working day delivery.

Shop a wide range of DIN 1481 Slotted Roll Pins online today.

Browse our full range here: https://springfasteners.co.uk/product-category/engineering-pins/spring-tension-pins-din1481/

Need technical support?

Call us on 01384 453955 (lines open Monday – Friday 8.30am – 5pm).

Or email us at sales@calebcomponents.com

We have now increased our range of Shakeproof Washers a.k.a Tooth Lock Washers.

We offer DIN 6797 External and Internal Shakeproof Washers from M2 to M30.

Check out both ranges here:

EXTERNAL DIN 6797A

INTERNAL DIN 6797J

Here are some helpful tips for measuring an External Circlip.

• Measure from the outside of the widest part of the Circlip, to the inside of the widest part of the circlip. For example, if this measures 15mm, you will need a 15mm external circlip.
• All our external circlips are listed by the shaft size they are fitting on to. For example, if your shaft measures 20mm, you will need a 20mm external circlip.

Still require assistance? Please call us on +44 (0) 1384 453955, and we will be happy to assist 😊

SHOP EXTERNAL CIRCLIPS

We have received brand new stocks across our Circlip range!

Shop a fantastic range of Circlips online, including standard DIN 471 / DIN 472, E Clips, Inverted Lug Circlips and External Heavy Duty Circlips.

Browse our full range of Circlips here: https://springfasteners.co.uk/product-category/circlips/

Need help finding the right size of Circlip? Use this helpful guide: https://springfasteners.co.uk/wp-content/uploads/2019/10/Metric-External-Internal-Circlips-DIN-471-472-Information-Specifications.pdf