These kinds of pins are universally used, economical shear-type fastener models, which possess self-locking capabilities. When they are created, they are manufactured to an oversize dimension. This is done so that once the pin has been placed inside a hole radial forces are exerted, holding the spring in position.

Caleb Components offers both DIN 1481(ISO 8752) Heavy Duty type & Light Weight DIN 7346 (ISO 13337) Type.
Links are below…

https://springfasteners.co.uk/product-category/pins/spring-tension-pins-din1481/

https://springfasteners.co.uk/product-category/pins/spring-tension-pins-slotted-type-din-1481-stainless-steel/

https://springfasteners.co.uk/product-category/pins/light-weight-spring-tension-pins-din-7346-iso-13337/

https://springfasteners.co.uk/product-category/pins/imperial-spring-tension-pins-carbon-steel/

Here at Caleb Components we stock a wide range of fasteners.

Included in our range are:
* External DIN 471 Circlips
* Internal DIN 472 Circlips
* DIN 1460 Heavy Duty External Circlips
* Inverted Lug Circlips
* Increased Abutment Circlips
* Spring Tension Pins DIN 1481
* Light Weight Spring Tension Pins DIN 7346
* Split Cotter Pins DIN 94
* Disc Springs DIN 2093
* Heavy Duty Disc Springs DIN 6796
* Ball Bearing Preload Disc Springs
* M2400 & M2300 Snap Rings
* Wire Rings
… and much more!

Please check out our online shop to see if we have what you need, if not please let us know and we will be happy to help you.

Caleb Components offers both D2000 (DIN984) Internal Increased Abutment Circlips & D2100 (DIN983) External Increased Abutment Circlips in Carbon Steel.

Internal DIN984 Circlip – These are radially fitted Circlips for bores with grooves. These Circlips are quite similar in design to the standard DIN472 Internal Circlip, but has additional lugs around the circumference of the Circlip. These extra lugs enable more effective securing of machined parts with chamfers.

External DIN983 Circlip – Again radially fitted Circlips, but are used for shafts with grooves. These are also similar to the standard DIN471 External Circlip, but again has additional lugs around the circumference. The advantage of this type of Circlips is that it helps to maintain good contact with chamfered parts.

Both of these types of Increased Abutment Circlips are available to purchase online… Please use our links below.
https://springfasteners.co.uk/product-category/circlips/external-circlip-with-increased-abutments-d2100-range/

https://springfasteners.co.uk/product-category/circlips/internal-circlip-with-increased-abutment-d2000-din-984-range/

Our newest addition to our online range is our Key Steel. Available in both Metric and Imperial sizes.
Metric = 300mm lengths & Imperial = 12″ lengths.
Key steel is rectangular lengths of steel ground to very tight tolerances. Key steel is identified by its cross sectional size, length and grade.
Please check out our range below:
https://springfasteners.co.uk/product-category/key-steel-300mm-12-lengths/
If the size you require can’t be seen, please let us know so we can help you find what you’re looking for.

We have now made available to purchase online A1000 & A0900 Wire Rings.
15 sizes in each range.
These Wire Rings have the ability to hold tight tolerances.
Why not check out our range!

https://springfasteners.co.uk/product-category/snap-rings/a0900-external-wire-rings/

https://springfasteners.co.uk/product-category/snap-rings/a1000-external-wire-rings/

PLEASE NOTE Some sizes within the ranges A0500, A0600, A0700 & A0800 are also available from stock. Please contact us if you have any requirements for our Wire Rings.

Flat Washers (available to buy online here) are supplied to DIN 125 Form A standard in a Bright Zinc Plate finish.
Our sizes range from M2 to M20.

The purpose of a Flat Washer is generally to offer protection of the surface around the nut or bolt head as well as distributing a more even load.

To see our full range of Flat Washers please click on the below link.
https://springfasteners.co.uk/product-category/washers/flat-washers-din-125-bzp/

If you can’t see what you’re looking for, please get in touch and we will do our best to help you find what you need.

At Caleb Components, we offer both External Inverted Lug Circlips (M1408/N1408) and Internal Inverted Lug Circlips (M1308/N1308). Available in Carbon Steel.

External Type – The External Inverted Lug Circlip functions the same as an standard External Circlip only the lugs are reversed. The advantage of this type of Circlip is that it gives extra clearance around the outer rim of the Circlip. This can be a great asset particularly if the shaft on which the Circlip sits is rotating and needs to be clear of any hindrances.

Internal Type – Similar to standard Internal Circlips but again lugs are reversed. Thus this type of Circlip is very useful when extra clearance is required as no lugs will be protruding within the bore.

Why not check out our Inverted Lug Circlips below.

https://springfasteners.co.uk/product-category/circlips/m1408-inverted-lug-external-circlips/

https://springfasteners.co.uk/product-category/circlips/n1408-imperial-inverted-lug-circlips/

https://springfasteners.co.uk/product-category/circlips/m1308-inverted-lug-internal-circlips/

https://springfasteners.co.uk/product-category/circlips/n1308-imperial-inverted-lug-internal-circlip/

Caleb Components stocks a wide range of Shim Washers to DIN 988 standard.
Carbon Steel, Plain Finish.

Shim Washers are made to precise dimensions and are used to take up excess space in assembles e.g. Bearing assemblies. As these parts come in a variety of thicknesses usually, 0.1mm, 0.2mm, 0.3mm, 0.5mm and 1.0mm (thicknesses above 1.0mm are generally classed as Support Washers), they offer a wide variety of packing thickness.

We also supply Shim Washer Kits for both the smaller sizes and medium sizes.

Please check out our range below to see if we have what you need… if not please get in touch and we will be happy to help you find what you are looking for.
https://springfasteners.co.uk/product-category/washers/shimsupport-washers-din-988/

Caleb Components offers the following Circlip Kits!

External Circlip Kit Carbon Steel (Metric)
External Circlip Kit Carbon Steel (Imperial)
Internal Circlip Kit Carbon Steel (Metric)
Internal Circlip Kit Carbon Steel (Imperial)

Why not take a look online to see if we have what you need! If not, give us a call and we will be happy to assist you.

** please note… Stainless Steel Circlip Kits to be added in the next month! **

You can purchase online our M1440 & N1440 Grip rings and our M1800 & N1800 Crescent rings.
Both parts available in Carbon Steel.

Grip Rings – These parts enable high gripping pressure because of their large section height. These part also has the advantage of being reused as they are not usually stretched beyond it’s elastic limit, and also causing no damage to the shaft.
To see our range of Grip Rings please check out our two links below.

https://springfasteners.co.uk/product-category/circlips/grip-rings-metric-m1440/

https://springfasteners.co.uk/product-category/circlips/grip-rings-imperial-n1440/

Crescent Rings – These parts offer a higher resistance to thrust loads than your standard type of E-clips. These are radially fitted circlips for shafts with grooves.
Again why not check out our range of Crescent Rings.

https://springfasteners.co.uk/product-category/circlips/crescent-rings-metric-m1800/

https://springfasteners.co.uk/product-category/circlips/crescent-rings-imperial-n1800/

If you can’t find what you’re looking for, please don’t hesitate to contact us and we will be happy to help.